CHASSIS NUMBER REGISTRATION PROCEDURE FOR ENGINE-ECU |
8.Select "IMMOBILIZER" in the "System Select" tag. Select the model year and push the OK button (Check each model if there is an option). Select "Special Function" on the next screen, and select "Engine Key Code Reg. & Chassis No. Writing" on the further screen. |
9.Push the OK button after "Key Code Registration" is displayed. 10.Push the OK button after "Completed. Press the OK button and move to Chassis No. writing function." is displayed. |
11.Enter the Chassis No. of registering vehicle and push the OK button. 12.Push the OK button after "Chassis No. Writing will start. Are you sure?" is displayed. 13.Return to the previous screen and "In Progress" is displayed at the lower-left corner on the screen. 14.Push the OK button after "Completed." is displayed. |
15.Chassis No. writing result is displayed. 16.Select "Chassis No. Information" on the "Coding" screen after the Chassis No. writing is completed, and check that the Chassis No. is changed. 17.Complete the M.U.T.-III. 18.Disconnecting the M.U.T.-III is the reverse of the connecting sequence, making sure that the ignition switch is at the "LOCK" (OFF) position. |
CHASSIS NUMBER REGISTERATION PROCEDURE FOR IMMOBLIZER-ECU. |
Connect the M.U.T.-III to the 16-pin diagnosis connector, and read the diagnosis code.
2.Start up the personal computer. 3.Connect M.U.T.-III USB cable (MB991827) to special tool Vehicle Communication Interface (V.C.I.) (MB991824) and the personal computer. 4.Connect M.U.T.-III main harness A (MB991910) to the V.C.I. 5.Connect the M.U.T.-III main harness A to the diagnosis connector. 6.Turn the V.C.I. power switch to the "ON" position.
|
8.Select "IMMOBILIZER" in the "System Select" tag. Select the model year and push the OK button (Check each model if there is an option).Select "Coding" on the next screen, and select "Chassis No. Writing" on the further screen. |
9.Enter the Chassis No. of registering vehicle and push the OK button. 10.Push the OK button after "Chassis No. Writing will start. Are you sure?" is displayed. 11.Return to the previous screen and "In Progress" is displayed at the lower-left corner on the screen. 12.Push the OK button after "Completed." is displayed. |
13.Chassis No. writing result is displayed. 14.Select "Chassis No. Information" on the "Coding" screen after the Chassis No. writing is completed, and check that the Chassis No. is changed. 15.Resister the other ID code.(Refer to GROUP 54A, Immobilizer system - Encrypted Cord Registration Criteria Table ) |