REMOVAL AND INSTALLATION


Pre-removal Operation
  • Under Skid Plate and Engine Room Under Cover Removal (Refer to GROUP 51 - Under Cover ).
  • Engine Coolant Draining (Refer to GROUP 14 - On-vehicle Service, Engine Coolant Replacement ).
  • Engine Oil Draining (Refer to ).
  • Alternator Removal (Refer to GROUP 16 - Alternator ).

 Post-installation Operation
  • Alternator Installation (Refer to GROUP 16 - Alternator ).
  • Engine Coolant Refilling (Refer to GROUP 14 - On-vehicle Service, Engine Coolant Replacement ).
  • Engine Oil Refilling (Refer to ).
  • Under Skid Plate and Engine Room Under Cover Installation (Refer to GROUP 51 - Under Cover ).




Removal steps


1.
 Water hose


2.
 Water hose


3.
 Engine oil cooler bolt

>>A<<
 4.
 Engine oil cooler

INSTALLATION SERVICE POINT

>>A<< ENGINE OIL COOLER INSTALLATION

Position the tab as shown in the illustration.