Tool
|
Number
|
Name
|
Use
|
|
MB991955 A: MB991824 B: MB991827 C: MB991910 D: MB991911 E: MB991825 F: MB991826
|
M.U.T.-III sub assembly
A: Vehicle communication interface (V.C.I.) B: M.U.T.-III USB cable C: M.U.T.-III main harness A (Vehicles with CAN communication system) D: M.U.T.-III main harness B (Vehicles without CAN communication system) E: M.U.T.-III adapter harness F: M.U.T.-III trigger harness
|
- Reading diagnosis code
- Diesel system inspection
- Measurement of fuel pressure
caution |
For vehicles with CAN communication, use M.U.T.-III main
harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead,
the CAN communication does not function correctly.
|
|
|
MB991658
|
Test harness
|
- Measurement of voltage during troubleshooting
- Inspection using an oscilloscope
|
|
MB991709
|
Test harness
|
- Measurement of voltage during Troubleshooting
- Inspection using an oscilloscope
|
|
MB992042
|
Engine coolant temperature sensor wrench
|
Removel and installation of the engine coolant temperature sensor
|
|
MB991614
|
Angle gauge
|
Installation of injector holder bolt
|
|
MB992048
|
Sprocket holder
|
Injection pump sprocket bolt removal and installation
|
|
MB992098
|
Injection pump sprocket puller
|
Injection pump sprocket removal
|
|
MB992099
|
Crank pulley puller
|