Code No. P0093: Fuel Leak Problem




OPERATION




FUNCTION




TROUBLE JUDGMENT


Check Conditions
Judgment Criterion

PROBABLE CAUSES




DIAGNOSIS PROCEDURE


STEP 1. M.U.T.-III diagnosis code


Q. Is any other diagnosis code than P0093 output?

Inspection chart for diagnosis codes (Refer to ).
Go to Step 2 .

STEP 2. Detection of fuel line leakage



  • Check whether fuel is leaking from a high-pressure fuel line.

Q. Is the check result normal?

Go to Step 3 .
Replace the parts of an abnormal location.

STEP 3. Release the air from the fuel line.



  • After releasing the air from the fuel line, continue idle operation for about five minutes and recheck for abnormal symptoms.

Q. Does trouble symptom persist?

Replace the engine-ECU. When the engine-ECU is replaced, write the chassis number (Refer to GROUP 00 - How to Perform Chassis Number Writing ). After replacing the engine-ECU, register the injector identification code and learn fuel injection (Refer to GROUP 00 - Precautions Before Service - What The Common Rail Engine Learns ).
Go to Step 4 .

STEP 4. Replace the common rail assembly and fuel injection tubes.



  • After replacing the common rail assembly and fuel injection tubes, re-check the trouble symptoms.

Q. Does trouble symptom persist?

Replace the engine-ECU. When the engine-ECU is replaced, write the chassis number (Refer to GROUP 00 - How to Perform Chassis Number Writing ). After replacing the engine-ECU, register the injector identification code and learn fuel injection (Refer to GROUP 00 - Precautions Before Service - What The Common Rail Engine Learns ).
The check is end.