REMOVAL AND INSTALLATION


Pre-removal and Post-installation Operation
  • Engine Coolant Draining and Refilling (Refer to ).
  • Air Cleaner Assembly Removal and Installation (Refer to GROUP 15 - Air Cleaner ).




Removal steps
<<A>>
 >>A<<
 1.
 Radiator lower hose connection


2.
 Battery wiring harness connection


3.
 Harness bracket


4.
 Water pump inlet hose fitting


5.
 Thermostat

REMOVAL SERVICE POINT

<<A>> RADIATOR LOWER HOSE DISCONNECTION
After making mating marks on the radiator hose and the hose clamp, disconnect the radiator hose.

INSTALLATION SERVICE POINT

>>A<< RADIATOR LOWER HOSE CONNECTION
1.Insert each hose as far as the projection of the water pump inlet hose fitting.
2.Align the mating marks on the radiator hose and hose clamp, and then connect the radiator hose.