REMOVAL AND INSTALLATION


Pre-removal Operation
  • Engine Coolant Draining (Refer to ).
  • Timing Belt and Timing Belt B Removal (Refer to GROUP 11A - Timing Belt ).
  • Thermostat Removal (Refer to ).

 Post-installation Operation
  • Thermostat Installation (Refer to ).
  • Timing Belt and Timing Belt B Installation (Refer to GROUP 11A - Timing Belt ).
  • Engine Coolant Refilling (Refer to ).




Removal steps


1.
 Plate


2.
 Gasket


·
 Oil hose and oil pipe (Refer to GROUP 11A - Vacuum Pump ).


3.
 Water pump


4.
 Water pump gasket

>>A<<
 5.
 O-ring

INSTALLATION SERVICE POINT

>>A<< O-RING INSTALLATION

Fit the O-ring to the groove in the water pipe. Then lubricate the O-ring and the inside of the water pump with water, and then insert the water pipe to the water pump.