REMOVAL AND INSTALLATION


caution When the specified alternator is not used, each ECU would probably fail.
Pre-removal Operation
  • Under Skid Plate and Engine Room Under Cover Removal (Refer to GROUP 51 - Under Cover ).
  • Air Cleaner Assembly Removal (Refer to GROUP 15 - Air Cleaner ).
  • Intercooler Air Hose A1 Removal (Refer to GROUP 15 - Intercooler ).
  • A/C Compressor Drive Belt, Alternator and Power Steering Oil Pump Drive Belt Removal (Refer to GROUP 11A - Crankshaft Pulley ).

 Post-installation Operation
  • A/C Compressor Drive Belt, Alternator and Power Steering Oil Pump Drive Belt Installation (Refer to GROUP 11A - Crankshaft Pulley ).
  • Intercooler Air Hose A1 Installation (Refer to GROUP 15 - Intercooler ).
  • Air Cleaner Assembly Installation (Refer to GROUP 15 - Air Cleaner ).
  • Alternator and Power Steering Oil Pump Drive Belt Tension Check (Refer to GROUP 11A - On-vehicle Service, Alternator and Power Steering Oil Pump Drive Belt Tension Check ).
  • A/C Compressor Drive Belt Tension Check and Adjustment (Refer to GROUP 11A - On-vehicle Service, A/C Compressor Drive Belt Tension Check and Adjustment ).
  • Under Skid Plate and Engine Room Under Cover Installation (Refer to GROUP 51 - Under Cover ).




Removal steps


1.
 Alternator connector and terminal
<<A>>
2.
 Alternator assembly

REMOVAL SERVICE POINT

<<A>> ALTERNATOR ASSEMBLY REMOVAL
Remove the alternator assembly from above the vehicle.