ACTUATOR TEST REFERENCE TABLE


Item No.
 Inspection item
 Test description
 Inspection condition
 Normal status
01
 Low-reverse solenoid valve
  • Actuate solenoid valve indicated by M.U.T.-III for 5 seconds at duty ratio of 50%.
  • Other remaining solenoid valve are not ON.
  • Ignition switch: ON
  • Selector lever position: P
  • Engine: Stopped
  • Accelerator pedal: Released

 When solenoid valve is actuated, operating sound is audible.
02
 Underdrive solenoid valve
03
 Second solenoid valve
04
 Overdrive solenoid valve
06
 Damper clutch control solenoid valve
12
 A/T control relay
 A/T control relay is OFF for three seconds.
  • Data list No.08
  • During test: 0 V
  • Normal: System voltage (V)