DISASSEMBLY AND ASSEMBLY



DISASSEMBLY STEPS


1.
 Oil level gauge


2.
 Oil filler tube


3.
 Harness clamp bracket


4.
 Harness bracket


5.
 Harness bracket


6.
 Cable end bracket


7.
 Speedmeter sleeve clamp

>>B<<
 8.
 Speedmeter driven gear sleeve


9.
 Harness bracket


10.
 Harness bracket

>>A<<
 11.
 Extension housing


12.
 Transmission

ASSEMBLY SERVICE POINTS

>>A<< EXTENSION HOUSING INSTALLATION
1.Apply Vaseline or petrolatum jelly on the bushing inside the extension housing.

caution Evenly squeeze out and apply the sealant so that it is not excessive and does not ooze out.
2.After squeezing out and applying the sealant on the extension housing at the section indicated in the illustration, install onto the transmission case.
Specified sealant:
Mitsubishi genuine sealant part No. MZ100389 or equivalent

>>B<< SPEEDOMETER DRIVEN GEAR SLEEVE ASSEMBLY INSTALLATION

Install the speedometer driven gear sleeve assembly into the extension housing as shown in the illustration.