GEAR OIL REPLACEMENT <4WD>

1.Remove the under cover and filler plug.

2.Remove the drain plug and drain oil.

3.Tighten the drain plug to the specified torque.
Tightening torque: 65 ± 5 N·m

4.Add the oil until the level comes to the lower portion of the filler plug hole.
Specified gear oil:

Hypoid gear oil API classification GL-5 or higher
Above 10°C: SAE 90
Below 10°C: SAE 80W

5.Tighten the filler plug to the specified torque.
Tightening torque: 50 ± 10 N·m