|
2.Remove the air pipe and air hose connection.
|
|
3.Connect a pressure gauge and air regulator to the air pipe. 4.
caution |
Do not apply a higher pressure so as not to damage the air regulator.
|
Adjust the outside air pressure with the air regulator until the pressure gauge shows approx. 24.5 kPa. 5.Lock the wheel on one side of the vehicle, and slowly turn the wheel on the other side. 6.Check for continuity in the rear differential lock detection switch.
|
Measurement conditions
|
Specified condition
|
When air is applied
|
Continuity (less than 2 ohms)
|
When air is released
|
Open circuit
|
|
|