REMOVAL AND INSTALLATION
Post-installation Operation
Brake Pedal Adjustment (Refer to
).
Removal steps
1.
Harness connector
2.
Stop lamp switch
3.
Adjuster
4.
Pedal stopper
5.
Snap pin
6.
Pin assembly
7.
Pedal pad
>>A<<
8.
Brake pedal and pedal support member
INSTALLATION SERVICE POINT
>>A<< BRAKE PEDAL AND PEDAL SUPPORT MEMBER INSTALLATION
Tighten the bolt "a" first, and then tighten the bolt "b."
).)
)