|
When disassembling the disc brakes, disassemble both sides (left and right) as a set.
|
|
caution |
Blow air little by little to remove the piston. The piston will rush out if a force of air is applied suddenly.
|
Place a piece of wood, etc. against the caliper body as shown. Blow compressed air through the brake hose to remove the piston boot and piston.
|
|
1.
caution |
Do not use a flat-tipped screwdriver or similar tool to remove piston seal. These may damage the inner side of the cylinder.
|
Remove the piston seal with your finger tip. 2.Clean the piston surface and inner cylinder with alcohol or brake fluid DOT 3 or DOT 4.
|