note | The ASTC-ECU is integrated in the hydraulic unit. |
REMOVAL SERVICE POINTS |
<<A>> HARNESS CONNECTOR DISCONNECTION |
Move the lock lever of the ASTC-ECU connector as shown in the illustration, and then disconnect
the harness connector. |
<<B>> HYDRAULIC UNIT ASSEMBLY (INTEGRATED WITH ASTC-ECU) REMOVAL |
|
|
INSTALLATION SERVICE POINT |
>>A<< BRAKE PIPE CONNECTION |
Connect the pipes to the hydraulic unit assembly as shown in the illustration. 1.From the master cylinder (primary) 2.To the front brake (LH) 3.To the rear brake (RH) 4.To the rear brake (LH) 5.To the front brake (RH) 6.From the master cylinder (secondary) |