SERVICE SPECIFICATIONS


Item
Standard value
Limit
Steering wheel free play mm
With engine running
-
30
With engine stopped
10 or less
-
Steering angle
Inside wheel
36°50’ ± 2°
-
Outside wheel (reference)
32°40’
-
Toe-in
At the centre of tyre tread (mm)
0 - 5
-
Toe-angle (per wheel)
0° 00’ - 0° 12’
Tie rod end ball joint starting torque N·m
1.47 - 2.94
-
Tie rod swing resistance N [Tie rod swing torque N·m]
4.4 - 35.7 [0.6 - 4.9]
-
Stationary steering effort N [Fluctuation allowance N]
39.2 or less [5.9 or less]
-
Oil pump pressure MPa
Oil pump relief pressure
8.5 - 9.0
-
Pressure under no-load conditions
0.5
-
Steering gear retention hydraulic pressure
8.5 - 9.0
-
Oil pressure switch operating pressure MPa
OFF → ON
1.8 - 2.4
-
ON → OFF
0.8 - 2.4
-
Steering gear total pinion torque N·m [Change in torque N·m]
0.6 - 1.7 [0.4 or less]
-
Opening dimension of special tool boot band crimping tool (MB991561) mm
2.9
-
Band crimped width mm
2.4 - 2.8
-