warning | For vehicles with SRS, before removing
the steering wheel and air bag module assembly, refer to GROUP 52B, Service Precautions ()
and Air Bag Module(s) and Clock Spring (). |
caution |
INSTALLATION SERVICE POINT |
>>A<< STEERING COLUMN SHAFT ASSEMBLY INSTALLATION |
|
1.Ensure that the tilt lever is in the lock position, and install the steering column. |
2.Tighten the three bolts (1 to 3) in the order shown by hand, and then tighten the bolt
(4) to the specified torque. Tighten also the three bolts (1 to 3) to the specified torque in
the order shown. Tightening torque: 22 ± 4 N·m |