- Power Steering Fluid Draining and Refilling (Refer to
)
and Bleeding (Refer to ).
Pre-removal and Post-installation Operation
|
) ) |
|
INSTALLATION SERVICE POINTS |
>>A<< RETURN TUBE ASSEMBLY/PRESSURE TUBE ASSEMBLY INSTALLATION |
) |
Align the mating marks on the gear box, return tube assembly and pressure tube assembly
when installing. |
>>B<< RETURN HOSE/RETURN TUBE ASSEMBLY INSTALLATION |
) ) |
1.Install so that the mating marks and upward. |
) ) |
2.Install so that the mating marks are faced forward. |
>>C<< PRESSURE HOSE ASSEMBLY INSTALLATION |
) |
1.Install so that the mating marks are facing rearward. |
) |
2.Place the pressure hose stopper to touch the power steering pump stopper, and install
the pressure hose. |
>>D<< SUCTION HOSE INSTALLATION |
) |
Install so that the markings are faced upward. |
>>E<< RETURN HOSE INSTALLATION |
) |
Install the return hose so that the markings and lines are faced rearward. |