REMOVAL AND INSTALLATION <CLUB CAB>
Post-installation Operation
Door Fit Adjustment (Refer to
).
Damper removal
1.
Damper
Door assembly removal steps
·
Front Scuff Plate and Cowl Side Trim (Refer to GROUP 52A, Interior Trim
.)
2.
Wiring harness connector connection
3.
Door check connecting bolt
4.
Door assembly
5.
Door upper hinge
6.
Door lower hinge
Striker removal steps
>>A<<
7.
Striker
8.
Striker shim
Door switch removal
9.
Door switch
INSTALLATION SERVICE POINT
>>A<< STRIKER INSTALLATION
Align the centre of the striker and latch within ±1.5 mm, and install.
).)
)