REMOVAL AND INSTALLATION <DOUBLE CAB>

Post-installation Operation

Door Fit Adjustment (Refer to ).

			Damper removal
		1.	Damper
			Door assembly removal steps
		·	Front Scuff Plate and Cowl Side Trim (Refer to GROUP 52A, Interior Trim .)
		2.	Wiring harness connector connection
		3.	Door check connecting bolt
		4.	Door assembly
		5.	Door upper hinge
		6.	Door lower hinge
			Striker removal steps
	>>A<<	7.	Striker
		8.	Striker shim
			Door switch removal
		9.	Door switch

			Damper removal
		1.	Damper
			Door assembly removal steps
		2.	Wiring harness connector connection
		3.	Door check connecting bolt
		4.	Door assembly
		·	Centre pillar trim lower (Refer to GROUP 52A, Interior Trim .)
		5.	Door upper hinge
		6.	Door lower hinge
			Striker removal steps
	>>A<<	7.	Striker
		8.	Striker shim
			Door switch removal
		9.	Door switch

INSTALLATION SERVICE POINT

>>A<< STRIKER INSTALLATION

Align the centre of the striker and latch within ±1.5 mm, and install.