REMOVAL AND INSTALLATION <DOUBLE CAB>



Door window glass runchannel removal steps


·
 Pull handle bracket (Refer to GROUP 52A, Door Trim .)

>>B<<
 1.
 Waterproof film


2.
 Door beltline weatherstrip inner


3.
 Door beltline moulding


4.
 Door window glass runchannel



Door beltline weatherstrip inner removal steps


·
 Door trim assembly (Refer to GROUP 52A, Door Trim .)


2.
 Door beltline weatherstrip inner



Door beltline moulding removal steps


·
 Door trim assembly (Refer to GROUP 52A, Door Trim .)


3.
 Door beltline moulding



Rear lower sash removal steps


·
 Pull handle bracket (Refer to GROUP 52A, Door Trim .)

>>B<<
 1.
 Waterproof film

>>A<<
 5.
 Rear lower sash



Door opening weatherstrip inner removal steps


·
 Cowl side trim and centre pillar upper trim (Refer to GROUP 52A, Interior Trim .)


6.
 Door opening weatherstrip inner



Door opening weatherstrip outer removal
<<B>>
7.
 Door opening weatherstrip outer




Door window glass runchannel and centre sash removal steps


·
 Pull handle bracket (Refer to GROUP 52A, Door Trim .)

>>B<<
 1.
 Waterproof film


2.
 Door beltline weatherstrip inner


3.
 Door beltline moulding


·
 Door window regulator assembly (Refer to .)


4.
 Door window glass runchannel
<<A>>
5.
 Centre sash



Door beltline weatherstrip inner removal steps


·
 Door trim assembly (Refer to GROUP 52A, Door Trim .)


2.
 Door beltline weatherstrip inner



Door beltline moulding removal steps


·
 Door trim assembly (Refer to GROUP 52A, Door Trim .)


3.
 Door beltline moulding



Door opening weatherstrip inner removal steps


·
 Rear scuff plate, centre pillar upper trim and rear pillar upper trim (Refer to GROUP 52A, Interior Trim .)


6.
 Door opening weatherstrip inner



Door opening weatherstrip outer removal
<<B>>
7.
 Door opening weatherstrip outer

REMOVAL SERVICE POINTS

<<A>> CENTRE SASH REMOVAL

1.Remove the door opening weatherstrip outer from the centre sash only.
2.Remove the centre sash mounting screws, and then remove the centre sash from the door panel.

<<B>> DOOR OPENING WEATHERSTRIP OUTER REMOVAL

Make a fabricated tool as shown in the illustration to remove the door opening weatherstrip outer.

INSTALLATION SERVICE POINTS

>>A<< REAR LOWER SASH INSTALLATION
Engage the rear lower sash with the window sash (door) securely.

>>B<< WATERPROOF FILM INSTALLATION

caution When sticking the waterproof film, ensure that the sealant is applied under the inner panel water drain hole.
Apply the specified adhesive to the waterproof film as shown and stick the film.
Specified sealant: 3M ATD Part No.8633 or equivalent