|
1.Check that the rear gate outside handle play is within the standard value range. Standard value (B): Vehicles without high-mounted stop lamp: 0.3 -
1.2 mm (target value: 0.7 mm) Vehicles with high-mounted stop lamp: 0.1 -
5.9 mm (target value: 2.6 mm) 2.If it deviates from the standard value, remove the rear gate cover (Refer to ).
|
|
3.Remove the rear gate outside handle holder. Then adjust the play by changing the connecting
point between the rear gate handle controller rod and the rear gate outside handle.
|