|
Perform the following initialisation when the anti-trap function has been triggered five times or more, or the sunroof motor assembly is removed.
|
|
1.Press the close/tilt-down switch to move the sunroof lid glass to the fully-tilted-up position. Each switch operation moves the sunroof lid glass by approximately 30 mm and then stops it automatically. Repeat the operation to move the sunroof lid glass to the fully-tilted-up position.
|
|
2.Hold the close/tilt-down switch for 3 seconds.
note |
If the close/tilt-down switch is released while the sunroof is moving, the initialisation will be cancelled. Repeat the procedures.
|
|
|
3.Press the open switch to move the sunroof lid glass to the fully-open position.
|
|
4.Press the close/tilt-down switch to move the sunroof lid glass to the fully-close position.
|