|
If the window glass automatically starts moving downwards
at the wrong time while it is being raised, carry out the following adjustment or replacement
procedures.
|
|
1.Remove the door trim assembly. (Refer to GROUP 52A, Door trim <Single
cab andClub cab>, <Double cab>).
|
|
2.Remove the waterproof film. (Refer to <Single
cab>, <Club cab>, <Double
cab>).
|
|
3.Remove the window regulator assembly from the door window glass, and then raise and
lower the door window glass by hand to check the operation force.
note |
Insert a cushion or similar object to prevent damage to the glass if it should happen
to fall down.
|
|
|
4.If the door window glass does not move up and down smoothly, check or repair the following
points.
- Check the installation condition of the runchannel.
- Repair any twisting in the door sash.
- Check the installation condition of the lower sash.
5.If repair or adjustment is not possible, replace the door assembly.
|