|
1.If the anti-trap function (safety mechanism) is activated consecutively three times
or more, the fully closed position that the power window switch has learned will be erased (initialised).
|
|
2.Operate the power window switch and fully open the door window glass.
|
|
3.
caution |
The anti-trap function does not work until the power window
switch completes learning the fully closed position (It is because the anti-trap function is
reset).
|
Operate the power window switch and fully close the door window glass. The power window
activates for 0.7 seconds and stops automatically when the power window switch is pressed once.
Repeat this operation until the door window glass fully closes and release the switch once.
Then, hold the power window switch to the fully closed side again for one second so that the
power window switch completes learning the fully closed position.
note |
If the power window switch is operated to open the door window glass while the switch
is learning, learning will be cancelled. If this happens, return to step 2.
|
|
|
Operate the power window switch to fully close the door window glass by one-shot up action
so that the power window switch will complete learning (Initialisation is not needed).
|