|
If the sliding resistance is too great when the window is being raised or the window glass
encounters an object, the window glass will lower by approximately 150 mm.
|
|
- Improper adjusted door window glass
- Incorrectly installed or warped glass slider
- Malfunction of the power window motor
- Malfunction of the window regulator
|
|
Check that the power window operating current is normal (Refer to ).
|
|
Q.
Is the check result normal?
|
|
Replace the defective power window motor assembly which operating current are
abnormal.
|
|
|
|
Check that the door window glasses are installed correctly (Refer to ).
|
|
Q.
Is the check result normal?
|
|
Adjust the door window glass (Refer to ).
|
|
|
|
Check that the power window does not lower automatically while it is being raised.
|
|
Q.
Is the check result normal?
|
|
The trouble can be an intermittent malfunction (Refer to GROUP 00, How to use
Troubleshooting/inspection Service Points -
How to Cope with Intermittent Malfunction ).
|
|
|
|
Replace the power window motor assembly of the defective window.
|
|
|