|
DIAGNOSIS PROCEDURE |
STEP 1. Connector check: D-11 rear panel power window-ECU connector and D-09 rear panel power window motor connector |
Q.
Is the check result normal?Go to Step 2.Repair the connector. |
STEP 2. Check the wiring harness between D-11 rear panel power window-ECU connector terminal Nos.8, 11 and 16 to D-09 rear panel power window motor connector terminal Nos.5, 6 and 2. |
Q.
Is the check result normal?Go to Step 3.Repair the wiring harness. |
STEP 3. Check whether the diagnosis code is reset. |
(1)Replace the rear panel power window motor. |
(2)Check that diagnosis code is not reset. |
Q.
Is diagnosis code set?
|
Replace the rear panel power window-ECU. |
|
The procedure is complete. |
|