|
DIAGNOSIS PROCEDURE |
STEP 1. Connector check: E-03 power window main switch connector and E-18 front power window motor (LH) connector |
Q.
Is the check result normal?Go to Step 2.Repair the connector. |
STEP 2. Check the wiring harness between E-03 power window main switch connector terminal Nos.8, 10 and 12 to E-18 front power window motor (LH) connector terminal Nos.6, 4 and 5. |
Q.
Is the check result normal?Go to Step 3.Repair the wiring harness. |
STEP 3. Check whether the diagnosis code is reset. |
(1)Replace the front power window motor (LH). |
(2)Check that diagnosis code is not reset. |
Q.
Is diagnosis code set?
|
Replace the power window main switch. |
|
The procedure is complete. |
|