|
DIAGNOSIS PROCEDURE |
STEP 1. Connector check: E-26 front power window sub switch connector and E-01 front power window motor (RH) connector |
Q.
Is the check result normal?Go to Step 2.Repair the connector. |
STEP 2. Check the wiring harness between E-26 front power window sub switch connector terminal Nos.8 and 3 to E-01 front power window motor (RH) connector terminal Nos.4 and 5. |
Q.
Is the check result normal?Go to Step 3.Repair the wiring harness. |
STEP 3. Check whether the diagnosis code is reset. |
(1)Replace the front power window motor (RH). |
(2)Check that diagnosis code is not reset. |
Q.
Is diagnosis code set?
|
Replace the front power window sub switch. |
|
The procedure is complete. |
|