REMOVAL AND INSTALLATION

<FRONT DOOR TRIM>

		Removal steps
	1.	Front door sash trim
	2.	Front door sash trim clip
<<A>>	3.	Front door trim screw cap
<<B>>	4.	Regulator handle clip <Manual window >
	5.	Regulator handle <Manual window>
	6.	Front door power window switch assembly <Power window>
	7.	Front door power window switch panel <Power window>
	8.	Front door power window switch <Power window>
	9.	Front door support panel <Manual window> or front door courtesy lamp lens <Power window>
	10.	Front door courtesy lamp bulb
	11.	Front door trim box <Manual window>
	12.	Front door trim
	13.	Pull handle bracket

CLIP AND CLAW POSITIONS

note

Each number in the illustration indicates a part number.

<REAR DOOR TRIM-DOUBLE CAB>

		Removal steps
<<A>>	1.	Rear door trim screw cap
	2.	Regulator handle clip <Manual window>
	3.	Regulator handle <Manual window>
	4.	Rear door power window switch assembly <Power window>
	5.	Rear door power window switch panel <Power window>
	6.	Rear door power window switch <Power window>
	7.	Rear door courtesy lamp lens <Vehicles with door lamp> or rear door courtesy lamp bulb <Vehicles without door lamp>
	8.	Rear door courtesy lamp bulb <Vehicles with door lamp>
	9.	Rear door trim box <Manual window>
	10.	Rear door trim
	11.	Rear door pull handle bracket

note

Manual window removal and installation steps for the front and rear are the same as for the front of the club cab.

CLIP AND CLAW POSITIONS

note

Each number in the illustration indicates a part number.

REMOVAL SERVICE POINTS

<<A>> FRONT/REAR DOOR TRIM SCREW CAP REMOVAL

Insert a flat-tipped screwdriver into the rear end of the front door trim screw cap, and prize out the cap to the direction shown. Then remove the tapping screw.

<<B>> REGULATOR HANDLE CLIP REMOVAL

Use cloth to remove the regulator handle clip as shown in the illustration.