Using a photometer, and following its manufacture’s instruction manual, measure
the headlamp intensity and check to be sure that the limit value is satisfied.
Limit: 30,000 cd or more per one headlamp
note
When measuring the intensity, maintain an engine speed of 2,000 r/min,
with the battery in the charging condition.
There may be special local regulations pertaining to headlamp intensity, be sure
to make any adjustments necessary to satisfy such regulations.
Check that the headlamp intensity of the low-beam satisfies the limit value.
If an illuminometer is used to make the measurements, convert its values to photometer
values by using the following formula.
I =
Er2 Where:
I=intensity (cd) E=illumination (lux) r=distance (m) from headlamps to illuminometer