Tool
|
Number
|
Name
|
Use
|
|
MB990784
|
Ornament remover
|
Combination meter bezel removal
|
|
MB991955
- MB991824
- MB991827
- MB991910
- MB991911
- MB991825
- MB991826
|
M.U.T.-III sub-assembly
- Vehicle Communication Interface (V.C.I.)
- M.U.T.-III USB cable
- M.U.T.-III main harness A (Vehicles with CAN communication system)
- M.U.T.-III main harness B (Vehicles without CAN communication system)
- M.U.T.-III measure adapter
- M.U.T.-III trigger harness
|
Check for other system diagnosis code and other system data list
caution |
For vehicles with CAN communication, use M.U.T.-III main
harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead,
the CAN communication does not function correctly.
|
|
|
MB991223
- MB991219
- MB991220
- MB991221
- MB991222
|
Harness set
- Check harness
- LED harness
- LED harness adapter
- Probe
|
Continuity check and voltage measurement at harness wire or connector
- For checking connector pin contact pressure
- For checking power supply circuit
- For checking power supply circuit
- For connecting a locally sourced tester
|
|
MB992006
|
Extra fine probe
|
Continuity check and voltage measurement at harness wire or connector
|