DATA LIST REFERENCE TABLE


1.Use the M.U.T.-III to check "Service Data."
note If a problem is found in the "Service Data" check, refer to the Check Trouble by Using the Input Signal Check (Refer to ).
2.The following input signals can be checked by using the M.U.T.-III.

INPUT SIGNALS WHICH CAN BE CHECKED BY SERVICE DATA



DIAGNOSABLE INPUT SIGNALS
Item No.
 Item name
 Check conditions
19
 Drive’s door switch
 Turns ON when the closed driver’s door is opened.
20
 Drive’s door unlock switch
 Turns ON when the locked driver’s door is unlocked.
21
 Drive’s door lock switch
 Turns ON when the unlocked driver’s door is locked.
25
 Front wiper auto stop switch
 Turns ON when the windshield wiper operates.
26
 Hazard warning lamp switch
 Turns ON when the hazard warning lamp switch operates.
28
 Steering lock switch
 Turns ON when the inserted ignition key is removed from the ignition key cylinder.
29
 Ignition switch(ACC)
 Turns ON when the ignition switch is turned to the "ACC" or "ON" position.
30
 Ignition switch(IG1)
 Turns ON when the ignition switch is turned to the "ON" or "START" position.
44
 Ignition switch(IG2)
 Turns ON when the ignition switch is turned to the "ON" position.
48
 Passenger’s door switch
 Turns ON when the closed passenger’s door is opened.
49
 Rear door switch
 Turns ON when the closed rear door is opened.
50
 Driver’s seatbelt(Buckle SW)
 Turns ON when the inserted driver's seatbelt is removed.
51
 Passenger seatbelt(Buckle SW)
 Turns ON when the inserted passenger’s seatbelt is removed.
55
 Battery voltage
 Voltage applied to the ETACS-ECU (battery) can be verified
56
 Remain of head lamp timer
 The delay off time for headlamp automatic-shutdown function can be checked.
58
 Vehicle speed signal
 Vehicle speed can be checked.
59
 Tail lamp output
 Turns ON when the tail lamp illuminates.
60
 Headlamp output
 Turns ON when the headlamp (low-beam) illuminates.
61
 Headlamp HI output
 Turns ON when the headlamp (high-beam) illuminates.
62
 Turn-signal lamp (LH) output
 Turns ON when the turn-signal lamp (LH) illuminates.
63
 Turn-signal lamp (RH) output
 Turns ON when the turn-signal lamp (RH) illuminates.
64
 Headlamp washer output
 Turns ON when the headlamp washer operates.
65
 Front wiper output
 Turns ON when the front wiper operates.
66
 Front wiper HI output
 Turns ON when the windshield wiper (high-speed) operates.
67
 Front washer output
 Turns ON when the windshield washer operates.
68
 Door "LOCK" output
 Turns ON when the door is in the "lock" state.
69
 Door "UNLOCK" output
 Turns ON when the door is in the "unlock" state.
70
 Front fog lamp
 Turns ON when the front fog lamp illuminates.
71
 Rear fog lamp
 Turns ON when the rear fog lamp illuminates.
72
 Room lamp output
 Turns ON when the room lamp illuminates.
74
 Buzzer
 Turns ON when the buzzer sounds.
75
 IG key cylinder ILL. output
 Turns ON when the ignition key cylinder illumination lamp illuminates.
76
 Illuminations power supply
 Turns ON when the illumination of clock or manual air conditioner illuminates.
77
 Power window relay output
 Turns ON when the ignition switch is turned to the "ON" position.
78
 Door indicator output
 Turns ON when the door indicator illuminates.
79
 Seatbelt indicator output
 Turns ON when the seatbelt indicator illuminates.
80
 All of the door switch output
 Turns ON when one of the doors is opened.
81
 Shift position "P" output
 Turns ON when the shift lever is in the "P" position.
86
 Intermittent wiper interval
 The intermittent time of windshield intermittent wiper can be checked.