CHECK TROUBLE BY USING THE INPUT SIGNAL CHECK



If a problem is found in the Service Data inspection, observe the table below.
Symptom
Inspection procedure number
Reference page
The column switch (lighting and wiper switch) signal is not received.
C-1

The ignition switch (ACC) signal is not received.
C-2

The ignition switch (IG1) signal is not received.
C-3

The hazard warning lamp switch signal is not received.
C-4

One of the door switch signals is not received.
C-5

The seat belt switch signal is not received.
L.H. drive vehicles
C-6

R.H. drive vehicles