|
1.Before inspection and adjustment, set vehicle in the following condition:
- Engine coolant temperature: 80 -
90 °C
- Lamps, electric cooling fan and accessories: Set to OFF
- Transmission: Neutral ("N" or "P" for vehicles with A/T)
- Steering wheel: Straightforward
|
|
2.Check whether or not the idle speed is the standard value. Refer to GROUP 11A, On-vehicle Service -
Idle Speed Adjustment . Standard value: 700 ±
50 r/min
|
|
3.When the A/C is running after turning the A/C switch to ON, and
the blower switch to the 3(MH) or 4(HI) position, check to be sure that the idle speed is at
the standard value. Standard value: 900 ±
100 r/min
note |
It is not necessary to make an adjustment, because the idling speed is automatically adjusted
by the ISC system. If, however, a deviation from the standard value occurs for some reason,
check the ISC system.
|
|