REMOVAL AND INSTALLATION


Pre-removal and Post-installation Operation
  • Refrigerant draining and Refilling (Refer to .)
  • Steering column shaft assembly Removal and Installation (Refer to GROUP 37, Steering shaft ).




Removal steps


·
 Glove box, passenger’s side under cover <3200>, Instrument panel side cover and glove box cover (Refer to GROUP 52A, Instrument Panel .)


1.
 Heater blower assembly


2.
 Blower motor


3.
 Case
<<A>>
4.
 A/C compressor suction pipe connection
<<A>>
5.
 A/C condenser outlet pipe connection


6.
 A/C pipe O-ring


7.
 Heater hose


·
 Instrument panel assembly (Refer to GROUP 52A, Instrument Panel .)


8.
 Front deck crossmember


9.
 Hose


10.
 A/C cooling unit

REMOVAL SERVICE POINT

<<A>> A/C COMPRESSOR SUCTION PIPE AND A/C CONDENSER OUTLET PIPE DISCONNECTION
caution Use the plug which is not breathable because A/C compressor oil or receiver have high hygroscopicity.
Plug the removed nipple of the pipe, hose and expansion valve to prevent the entry of dust and dirt.