REMOVAL AND INSTALLATION


Pre-removal and Post-installation Operation
  • A/C Compressor Drive Belt, Alternator and Power Steering Oil Pump Drive Belt Removal and Installation (Refer to ).
  • Air Duct Removal and Installation (Refer to GROUP 15 - Air Cleaner ).

<Except high power>

Removal steps


1.
 Engine cover
<<A>>
2.
 Power steering oil pump assembly


3.
 Power steering oil pump bracket A


4.
 Oil hose


5.
 Oil hose


6.
 Oil pipe


7.
 Vacuum hose connection


8.
 Vacuum pump assembly


9.
 O-ring


10.
 O-ring

<High power>

Removal steps


1.
 Engine cover
<<A>>
2.
 Power steering oil pump assembly


3.
 Power steering oil pump bracket A


4.
 Idler pulley


5.
 Oil hose


6.
 Oil hose


7.
 Oil pipe


8.
 Vacuum hose connection


9.
 Vacuum hose connection


10.
 Vacuum pump assembly


11.
 O-ring


12.
 O-ring

REMOVAL SERVICE POINT

<<A>> POWER STEERING OIL PUMP ASSEMBLY REMOVAL
1.With the hose installed, remove the power steering oil pump assembly from the bracket.
2.After removing the power steering oil pump assembly, secure it with a cord in the location where the removal and installation of the vacuum pump assembly cannot be hindered.