|
Using M.U.T.-III, perform diesel fuel system diagnosis code (Refer to GROUP 13A - Diagnosis
Function ).
|
|
Q.
Is any diagnosis code set?
|
|
Repair the diesel fuel system (Refer to GROUP 13A - Troubleshooting, Inspection
Chart for Diagnosis Code ). Then go to Step 5.
|
|
|
|
Using M.U.T.-III, perform A/T system diagnosis code (Refer to GROUP 23A - Troubleshooting,
Diagnosis Function ).
|
|
Q.
Is any diagnosis code set?
|
|
Repair the A/T system (Refer to GROUP 23A - Troubleshooting, Diagnosis
Code Chart ). Then go to Step 5.
|
|
|
|
Using M.U.T.-III, check the data list (Refer to - data
list reference table).
|
|
- Item 04: Vehicle speed signal
|
|
Q.
Is the check result normal?
|
|
Replace the engine-ECU (Refer to GROUP 13A - Engine-ECU ).
Then go to Step 5.
|
|
|
|
Replace the engine-ECU (Refer to GROUP 13A - Engine-ECU ).
Then go to Step 5.
|
|
|
|
It can be assumed that this malfunction is intermittent (Refer to GROUP 00 - How
to Use Troubleshooting/Inspection Service Points, How to Cope with Intermittent Malfunctions ).
|
|
|
|
The procedure is complete.
|
|
|