REMOVAL AND INSTALLATION
Removal steps
1.
Rear differential lock switch
·
Glove box cover (Refer to GROUP 52A, Instrument Panel
.)
2.
Rear differential lock-ECU
>>A<<
3.
Vacuum hose
4.
Rear differential lock harness
5.
Vapour hose
6.
Hose
7.
Bracket
8.
Rear differential lock air pump
9.
Bracket
10.
Rear differential lock detection switch (Refer to
.)
11.
Gasket
INSTALLATION SERVICE POINT
>>A<< VACUUM HOSE CONNECTION
Connect the vacuum hose so that the white mark is located upward.