|
Check that the power window timer works as described below. If it does not work, carry
out troubleshooting (Refer to ).
|
|
- Close the doors and turn the ignition switch to the LOCK (OFF) position.
Check that the power window operates for 30 seconds.
- The timer activates by closing the doors and turning the ignition switch to the
LOCK (OFF) position. Check if the power window operates within 30 seconds after the driver’s door
is opened while the timer is being activated. The timer period will be extended if the driver’s
door is opened, but the timer will be cancelled if the driver’s door is closed while the
timer is being activated.
|