Code No.1005: P/W (DR) 3 Times jam-protection
|
caution |
Whenever the ECU is replaced, ensure that the input and output signal circuits are normal.
|
|
COMMENTS ON TROUBLE SYMPTOM
If the anti-trap function is activated consecutively three times or more, power window main switch sets the diagnosis code No. 1005.
PROBABLE CAUSES
- Malfunction of the front power window motor <driver’s side>
- Malfunction of the power window main switch
|
STEP 1. Confirm the front power window <driver’s side> learning function.
|
|
(1)Check that the power window main switch has learned the fully closed position of the window (Refer to ).
|
|
(2)On completion, check that diagnosis code No.1005 is not reset.
|
|
Q.
Is the check result normal?
|
|
The procedure is complete.
|
|
|
|
Go to Step 2.
|
|
|
|
STEP 2. Check whether the diagnosis code is reset.
|
|
(1)Replace the front power window motor <driver’s side>.
|
|
(2)Check that diagnosis code is not reset.
|
|
Q.
Is diagnosis code set?
|
|
Replace the power window main switch.
|
|
|
|
The procedure is complete.
|
|
|