|
DIAGNOSIS PROCEDURE |
STEP 1. Connector check: E-13 rear power window sub switch (LH) connector and E-14 rear power window motor (LH) connector |
Q.
Is the check result normal?Go to Step 2.Repair the connector. |
STEP 2. Check the wiring harness between E-13 rear power window sub switch (LH) connector terminal No. 3 and E-14 rear power window motor (LH) connector terminal No. 5. |
Q.
Is the check result normal?Go to Step 3.Repair the wiring harness. |
STEP 3. Check whether the diagnosis code is reset. |
(1)Replace the rear power window motor (LH). |
(2)Check that diagnosis code is not reset. |
Q.
Is diagnosis code set?
|
Replace the rear power window sub switch (LH). |
|
The procedure is complete. |
|