|
The lighting control sensor may be defective or a failure in the lighting control sensor
(rain sensor) adaptation is suspected.
|
|
- Malfunction of the lighting control sensor
|
|
- Lighting control sensor (rain sensor) adaptation failure
|
|
Visually check the presence of scratches or air bubbles (diameter of 5 mm or more) on
the windshield to which the lighting control sensor is installed.
|
|
Q.
Is the check result normal?
|
|
Replace the windshield (Refer to GROUP 42 - Windshield Removal and Installation ).
|
|
|
|
Check that the windshield wipers work normally.
|
|
Q.
Is the check result normal?
|
|
Refer to trouble symptom chart .
|
|
|
|
Check if an ETACS-related diagnosis code is set.
|
|
Q.
Is the diagnosis code set?
|
|
Diagnose the ETACS-ECU. Refer to GROUP 54A - ETACS .
|
|
|
|
Check if a lighting control sensor diagnosis code is set.
|
|
Q.
Is the diagnosis code set?
|
|
Diagnose the lighting control sensor. (Refer to GROUP 54A - Diagnosis
Code Chart ).
|
|
|
|
Check that the lighting control sensor (rain sensor) is installed to the windshield glass
correctly.
|
|
Q.
Is the check result normal?
|
|
Go to Step 6 after completion of the lighting control sensor (rain sensor) adaptation
().
|
|
|
|
Install the lighting control sensor (rain sensor) to the windshield glass correctly
(Refer to GROUP 54A - Lighting control sensor removal and Installation).
|
|
|
|
Check the lighting control sensor (rain sensor) after completion of the lighting control
sensor (rain sensor) adaptation
|
|
(1) Windshield glass surface should be dry.
|
|
(2) Pour the windshield glass surface where the lighting control sensor is installed.
|
|
Q.
Does the windshield wiper operate?
|
|
Operate once or more : Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection
Service Points - How to Cope with Intermittent Malfunction ).
|
|
|
|
Does not operate : Troubleshoot the rain-sensitive wiper function (Refer to Inspection procedure
7 ).
|
|
|