REMOVAL AND INSTALLATION


Pre-removal and Post-installation Operation
  • Refrigerant draining and Refilling (Refer to .)
  • Steering column shaft assembly Removal and Installation (Refer to GROUP 37, Steering shaft ).




Removal steps


·
 Glove box, passenger’s side under cover <Except single cab>, Instrument panel side cover and glove box cover (Refer to GROUP 52A, Instrument Panel .)


1.
 Heater blower assembly


2.
 Blower motor


3.
 Case


4.
 Inside/outside air selection damper control motor


5.
 Clean air filter <Vehicles with clean air filter>
<<A>>
6.
 A/C compressor suction pipe connection
<<A>>
7.
 A/C condenser outlet pipe connection


8.
 A/C pipe O-ring


9.
 Heater hose


·
 Instrument panel assembly (Refer to GROUP 52A, Instrument Panel .)


10.
 Front deck crossmember


11.
 Hose


12.
 A/C cooling unit

REMOVAL SERVICE POINT

<<A>> A/C COMPRESSOR SUCTION PIPE AND A/C CONDENSER OUTLET PIPE DISCONNECTION
caution Use the plug which is not breathable because A/C compressor oil or receiver have high hygroscopicity.
Plug the removed nipple of the pipe, hose and expansion valve to prevent the entry of dust and dirt.