GENERAL INFORMATION






Item for display indication
Note
Information
Drive information
Average vehicle speed

  • Display can be changed to "km/h" or "mph" as an adjustment function.
  • Display range is 0 to 240 km/h for "km/h" and 0 to 150 mph for "mph".
  • Display is updated every 10 seconds when the ignition switch is in the "ON" position.
  • Average vehicle speed can be displayed either by a bar graph or a line graph.

Average fuel consumption

  • Display can be changed to "km/L", "L/100 km" or "mpg" as an adjustment function.
  • Display range is 0 to 99.9 km/L for "km/L", 0 to 99.9 L/100 km for "L/100 km", and 0 to 99.9 mpg for "mpg" .
  • Display is updated every 10 seconds when the ignition switch is in the "ON" position.
  • Average fuel consumption can be displayed either by a bar graph or a line graph.

Possible cruising distance

  • Display can be changed to "km" or "miles" as an adjustment function.
  • Display range is 50 to 3000 km for "km" and 30 to 2000 miles for "miles".
  • Display is updated every 1 km when the possible cruising distance decreases.
  • The cruising-available distance can be displayed by a line graph.

Information
Environmental data
Air temperature

  • Display can be changed to "°C" or "°F" as an adjustment function.
  • Ambient temperature display range is -29 to 50 °C. <Vehicles with auto A/C>
  • Ambient temperature display range is -40 to 50 °C. <Vehicles without auto A/C>
  • "°F" is calculated from the value of "°C" and the display range is -40 to 122 °F.
  • Display is updated if the temperature rises 1 °C (1 °F) within 30 seconds or decreases 1 °C (1 °F) within 2.5 seconds.
  • When the air temperature is 3 °C (37 °F) or lower, the freeze mark appears and the freeze warning *2 operates.

Direction
Head up type, 8-direction indication (N: North, E: East, W: West, S: South)
Atmospheric pressure

  • Display can be changed to "m" or "ft" as an adjustment function.
  • Display range is -500 to 4000 m for "m" and -1600 to 12000 ft for "ft".
  • Display resolution is 100m (300ft).
  • Display is updated every 5 seconds.

Altitude

  • Display can be changed to "hPa", "mb", "kPa", "kPa" or "inHg" as an adjustment function.
  • Display range is 614 to 1070 hPa for "hPa", 614 to 1070 mb for "mb", 61.4 to 107.0 kPa for "kPa", and 18.1 to 31.6 inHg for "inHg" .
  • Display resolution is 2hPa (2mb, 0.2kPa, 0.1inHg).
  • Display is updated every 5 seconds.
  • Altitude is calculated based on 1013.25 hPa as 0 m. (25 °C)

Information
Time data
Time

  • In 24-hour system, "0:00" to "23:59"
  • In 12-hour system, "1:00" to "12:59" with AM/PM indication

Date
Display range is January 1, 2009 - December 31, 2099.
Audio system information
Radio
When the audio is in the "ON" state, the audio system information screen appears.
CD player
When the audio is in the "ON" state, the audio system information screen appears.
Settings
User settings
Clock display
-
Display brightness adjustment
The display brightness in day/night situations is adjusted.
Direction adjustment
The deviation of earth magnetism from place to place is adjusted.
Calendar adjustment
The date is adjusted and the display pattern is selected.
Atmospheric pressure adjustment
The atmospheric pressure is adjusted and the adjusted value is initialised.
User customise
Units, language *1 (English, Spanish, French, German, Italian, Portuguese), and hour system are set and initialised.
Audio quality/field settings
FADER, BALANCE, BASS, TREBLE
-
note
  • *1: On the audio screen, only the PTY (Programme type) language can be switched. On the audio screen, the display is in English, except the PTY. (When Portuguese is selected, the PTY language is displayed in English. ) And the service mode is displayed in English only.
  • *2: When the conditions descried as below are met, the freeze warning operates.
Conditions

Display control
When the air temperature is 3 °C or lower, at the ignition switch "ON" position.
The ETACS-ECU buzzer sounds and the freeze mark flashes for 10 seconds.
When the air temperature that is over 3 °C at the ignition switch "ON" position changes to 3 °C or lower.
After the warnings described as above is operated.
When the air temperature that is 6 °C or higher changes to 3 °C or lower
When the air temperature reaches to 6 °C, the freeze mark disappears, and when the air temperature decreases to 3 °C or lower, the freeze mark flashes for 10 seconds. However, the buzzer does not sound.
When the air temperature that is over 3 °C but below 6 °C decreases to 3 °C or lower
When the air temperature is over 3 °C but below 6 °C, the freeze mark keeps displaying. If the air temperature decreases to 3 °C or lower again, the buzzer does not sound and the freeze mark does not flash again.

SYSTEM BLOCK DIAGRAM