ACTUATORS

ABS warning lamp, Brake warning lamp

The ABS system informs the driver of the ABS system status by illuminating, extinguishing, or flashing the ABS warning lamp and brake warning lamp as follows.
ABS warning lamp

Turns ON when a system malfunction occurs.
Turns ON when the ABS control is disabled due to the activated rear differential lock.

Brake warning lamp

Turns ON when an EBD system malfunction occurs.
note
Turns ON when the brake fluid level in the reservoir tank becomes the specified value or lower.

Turns ON when the parking brake lever is pulled and the brake is activated.

ABS warning lamp and brake warning lamp illumination or flashing pattern

State		ABS warning lamp	Brake warning lamp
Normal	Correct	-	-
Normal	Rear differential lock activated	Illuminates	-
Faulty	ABS failure	Illuminates	-
Faulty	EBD failure	Illuminates	Illuminates
When M.U.T.-III is connected	Actuator not operated	-	-
	Actuator operated	Illuminates	-
	After actuator operated^*	Illuminates^*	Illuminates^*

note

^*:ABS and brake warning lamps remain illuminated until the ignition is switched off.