|
1.Check engine oil level (Refer to ).
|
|
2.Remove the engine oil pressure switch (Refer to ) <4B1,
4J1>.
|
|
3.Remove the engine oil pressure switch (Refer to ) <4N1-M/T>.
|
|
4.Remove the engine oil pressure switch (Refer to ) <4N1-A/T>. 5.Install the oil pressure gauge.
note |
Use an adapter of PT 1/8 thread.
|
6.Run the engine to warm it. 7.After the engine has been warmed up, check that oil pressure is within the standard
value. Standard value:
At idle: 29 kPa or more At 3,500 r/min: 294 - 686 kPa
8.Remove the oil pressure gauge. 9.Install the engine oil pressure switch (Refer to ) <4B1, 4J1>. 10.Install the engine oil pressure switch (Refer to ) <4N1-M/T>. 11.Install the engine oil pressure switch (Refer to ) <4N1-A/T>.
|