)
- MB992744
- MB992745
- MB992746
- MB992747
- MB992748
- Vehicle communication interface-Lite (V.C.I.-Lite)
- V.C.I.-Lite main harness A (for vehicles with CAN communication)
- V.C.I.-Lite main harness B (for vehicles without CAN communication)
- V.C.I.-Lite USB cable short
- V.C.I.-Lite USB cable long
- MPI system inspection
)
- MB991955
a: MB991824
b: MB991827
c: MB991910
d: MB991911
e: MB991825
f: MB991826
- M.U.T.-III sub assembly
a: Vehicle communication interface (V.C.I.)
b: USB cable
c: M.U.T.-III main harness A (Vehicles with CAN communication system)
d: M.U.T.-III main harness B (Vehicles without CAN communication system)
e: Adapter for measurement
f: Trigger harness
- MPI system inspection
- Fuel pressure test
| caution | For vehicle with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly. |
)
- Measurement of voltage during troubleshooting
- Measure engine-ECU terminal voltage.
- Inspection using an oscilloscope
)
- Measurement of voltage during troubleshooting
- Inspection using an oscilloscope
)
- Measurement of voltage during troubleshooting
- Inspection using an oscilloscope
- Oxygen sensor check
)
- Measure fuel pressure
- Check the spray condition of injectors
)
)
)
)
)
)
)
)
)