Item No.
|
Inspection Item
|
Drive content
|
Inspection condition
|
Normal condition
|
1
|
Injectors
|
Specified injector is stopped
|
Engine: warm up, idle (cut the fuel supply to each injector in turn and check cylinders which don’t affect idling.)
|
Idle condition is changed by stopping selected cylinder: this can cause an unstable condition and the engine may stall.
|
9
|
Fuel pump
|
Drive fuel pump to circulate fuel
|
- Ignition switch: ON
- Check for pump operating noise near fuel tank
|
Operating noise audible
|
10
|
Purge control solenoid valve
|
Switch solenoid valve from OFF to ON
|
Ignition switch: ON
|
When the valve is actuated, operating noise is audible
|
14
|
Cooling fan motor
|
Actuate the fan motor
|
Ignition switch: ON
|
Fan motor rotates at high speed
|
16
|
A/C compressor relay
|
Switch the A/C compressor relay from OFF to ON
|
Ignition switch: ON
|
The operating sound of A/C compressor is audible
|
17
|
Oil feeder control valve
|
Switch the oil feeder control valve from OFF to ON
|
Ignition switch: ON
|
When the valve is actuated, operating noise is audible
|