Inspection Procedure 13: The Feeling of Impact or Vibration when Decelerating


COMMENTS ON TROUBLE SYMPTOM



PROBABLE CAUSES



DIAGNOSIS PROCEDURE

STEP 1. M.U.T.-III diagnosis code

Q. Is diagnosis code set?
Inspection chart for diagnosis code (Refer to ).
Go to Step 2.

STEP 2. M.U.T.-III data list

  • Refer to Data List Reference Table .

    1. Item 11: Accelerator pedal position sensor (main)
    2. Item 12: Accelerator pedal position sensor (sub)
    3. Item 13: Throttle position sensor (main)
    4. Item 15: Throttle position sensor (sub)

Q. Are the check results normal?
Go to Step 3.
Perform the diagnosis code classified check procedure for the sensor that has shown an abnormal data value (Refer to Inspection Chart for Diagnosis Code ).

STEP 3. Check throttle body (throttle valve portion) contamination.

Q. Is the check result normal?
Replace the engine-ECU.
Clean throttle body (throttle valve portion) (Refer to ).