|
- Item 6: Engine coolant temperature sensor
|
|
OK:
Engine cold state: At ambient temperature (atmospheric temperature) or equivalent. Engine hot state: At 80 - 120°C
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|
|
- Engine coolant temperature sensor connector check.
- Disconnect connector, and measure at sensor side.
- Resistance between terminals.
|
|
OK:
Engine coolant temperature at -20°C: 14 - 17 kΩ Engine coolant temperature at 0°C: 5.1 - 6.5 kΩ Engine coolant temperature at 20°C: 2.1 - 2.7 kΩ Engine coolant temperature at 40°C: 0.9 - 1.3 kΩ Engine coolant temperature at 60°C: 0.48 - 0.68 kΩ Engine coolant temperature at 80°C: 0.26 - 0.36 kΩ
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or replace the engine coolant temperature sensor.
|
|
|
|
- Disconnect connector, and measure at harness side.
- Ignition switch: "ON"
- Voltage between terminal engine-ECU WTS line and body earth.
|
|
Q.
Is the check result normal?
|
|
- Check power line for short circuit.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire.
|
|
|
|
- Item 6: Engine coolant temperature sensor
|
|
OK:
Engine cold state: At ambient temperature (atmospheric temperature) or equivalent. Engine hot state: At 80 - 120 °C
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|